Angled Frame Panhards
These offset and adjustable panhard brackets are laser cut and formed in our own facility. They are designed to have a 15° angle from vertical. The three mounting holes that are 9/16” in diameter and spaced 1-3/4” apart giving a total of 3-1/2” of adjustment. These brackets are shipped unfinished and unwelded giving you the freedom to trim or adjust the bracket as desired.
This bracket was designed to work with ¾ inch rod ends using misalignment spacers with an inside width of 1-3/4″ and a 9/16″ through-hole. Comes with a weld-on reinforcement plate to strengthen bracket.
• Laser-cut 1/4” steel
• 9/16” mounting holes spaced 1-3/4” apart
• 15° inside/outside mounted angle on the frame mount panhard
• Shipped unfinished and unwelded
• Not designed for use with High Steer